Free 3D Postcard Mockup Generator – Any Size
A printed card built from its width and height, both sides printed head to head. Set the corners and finish, add front and back artwork, turn it over, export.
FreeParametricCustom size
Any size, from the sliders
FreeParametricA6
148 × 105 mm, matte
FreeParametric4 × 6 in
152 × 102 mm, rounded corners
FreeParametric5 × 7 in
178 × 127 mm, uncoated
FreeParametricA5
210 × 148 mm, silk
FreeParametricDL
210 × 99 mm, rounded corners
FreeParametricSquare
148 × 148 mm, gloss
About this postcard
A postcard is a sheet of board, 300–350 g/m², printed both sides head to head so the back reads upright when you flip it over the short edge. The mockup builds that board at your size, with square or rounded corners and a finish from uncoated to gloss that sets how the board and the print catch the light.
Seven presets cover A6, the US 4 × 6, the A2 and 5 × 7 note cards, A5, DL and square; the sliders run 100–230 by 90–165 mm.
The motion picks the card up, turns it over in the hand and sets it down back up, so the back is shown the way a reader sees it.
Questions
What does "printed head to head" mean?
The back is oriented so that flipping the card over its short edge shows it upright; the mockup prints and turns it that way.
Can I use my own sizes?
Yes. Each product has sliders for its main dimensions and presets for the common sizes; everything else, such as wall thickness or spine width, follows from them.
What size should my artwork be?
The Artwork panel shows each area's print size in millimetres for the current settings; prepare the file at that size, at 300 dpi if it is for print too.
More parametric mockups
Want photographic detail? Browse the catalog mockups
Fixed 3D models of real products, with colours, lighting and animation in the full editor.
