Free Lip Balm Tube Mockup Generator
Free Parametric New
A ⌀20 × 70 mm push-up paper tube, the plastic-free lip balm format. Set the size and paper, add your label, export.
Hover the tube to add artwork · double-click artwork to move & scale
Other sizes for this paper tube
As built
- Outer ⌀ × height
- ⌀ 20 × 70 mm (Lip balm)
- Lid cut line
- 60 %, 42 mm above the ground
- Paper and wall
- Brown kraft, 1.0 mm board
- Print areas
- Tube body 63 × 42 · Lid side 63 × 28 · Lid top ⌀ 18 mm
- Export
- Transparent PNG, 1080 / 2048 / 4096 px
About this paper tube
Paper lip balm tubes replaced plastic sticks for many natural brands: a 20 mm cardboard tube, 70 mm tall, with a short lid and a push-up base. The label wraps the body and the lid carries a small mark.
At this size the wall is thin, about 1 mm, and the print area is small: roughly 63 × 42 mm on the body, so keep type large.
Kraft reads "natural"; white gives a cleaner cosmetic look.
Questions
Does the mockup show the push-up base?
The base is the closed bottom of the tube; the push-up disc inside is not modelled.
More parametric mockups
Free
Screw-cap jarA plastic jar whose cap unscrews, in clear or solid plastic in any colour.
Free
BookA stapled booklet, paperback or hardcover that opens and leafs through.
Free
Squeeze tubeA soft cosmetic or toothpaste tube, sealed flat at its tail, whose cap opens.
Free
Coffee cupA takeaway paper cup with a sip lid that comes off, in any size from espresso to 20 oz.
Want photographic detail? Browse the catalog mockups
Fixed 3D models of real products, with colours, lighting and animation in the full editor.
